August 15, 2012

EC: Coping with Shifts

We are as affected by the cosmic tugging as mother earth is.  We are beginning to understand that earth is a being itself and as our landlord we just can't  ignore her well being.

(This blog post relates to Tales from the Realms - Shifting)

It is said that the photon belt that our planet encounters now contributes to the solar particles breaching the planet's ozone layer.  I can feel  our atmosphere is becoming saturated with energetic particles and there are changes to the direction of the sunlight as well as the typhoons.
(Signs Of Magnetic Pole Shift, Explaining the Earth Wobble - Earth Changes and the Pole Shift )

According to Mr. Mills, more lightning strikes and heavier cloud formations are some of the results of these energetics.  Weather phenomena and earthquakes increase significantly in his time-line.

These are exacerbated by weather engineering.  The cabal is trying to profit, foment attack on the population's psyche and steer destruction from themselves.

Similarly, it is important for us to remain composed and flow with the rhythm of earth despite the media programs of destruction, politics, war and conflict.  We have to disconnect from main stream media and politics to allocate more self evaluation and preparation.

This scenario may happen in a more moderate nature in our realities.  Just the same, we have to prepare for an off the grid strategy.  Governments and politicians are there largely to make themselves pretty so they tend to project an image where they are in control of the situations.

The video referenced above can be found here:

Here are some things we may do or develop as a suggestion:

I.  Off-the-Grid Energy Sources:

1.  Miller's Differential Wheel  (the attached picture is not exactly how I saw it but only serves as an illustration)

  • Mr. Mills is using some sort of solar wheel that supposedly uses nitinol.   
I think that it is just like a gravity wheel with pockets containing heavier than water liquid.  The solar collector blade heats the upper pockets of the wheel and then the nitinol springs expand the pockets so that the liquid from the lower wheel pockets is sucked.  This makes the wheel roll down from heavier upper weight. The lower spokes could be partly submerged in water, but the solar collector blades was partially blocking my view.

  • Accordingly, he has other units that uses thin refrigerant neumatic tubes to change the volume of spoke pockets and push-up weight from the cooler lower pockets to the upper portion of the spokes.

2.   Available DIY Samples

If the video does not play, try clicking it to open in a separate youtube window/tab.

If you have an overhead water tank, you can use a Mini Hydro Turbine to harness power out of the lowly household faucet. Mini Hydro Turbine converts water pressure into electricity that can be used to run or charge other gadgets. (If you are near a river the Ramp Pump is ideal in filling a water reservoir from where you can attach the mini hydro turbine and irrigate your vegetable garden.)

A different unit using the same principle is shown here.   I found this unit here.

It is interesting that even before I readied this blog post,  I already saw these, together with some other energy sources like those obtained from the rise and fall of sea level as can be found here.

I can only say more power for anyone trying out these ideas like this one.

Employing some battery charging system, small energies collected can accumulate to power home electronics.  These little energy sources can also be used in hydrolysis to collect hydrogen for modified engines (adjusted to run on hydrogen).

Here are some other energy related videos.  Not all may be practical at this time, but we can never tell in the future.  They can be seeds of other solutions.

II.  Origami Structures and Alternative construction

Mr. Mills use some fibrous plants and resins for creating his contoured structures. Now, I think that if cardboard is embedded with such fibrous matter and applied with certain resins, the water resistance and strength obtained can make origami structures and furniture desirable. Using such technique, ordinary folks will be empowered to create functional every day objects. It would be easy enough to explore designs using bond-papers for furniture, tents and vessels. Such capacity will be crucial in quick recovery effort for disaster areas.

It may not even entail origami designs. But the materials for proper and convenient molding must be available and encouraged within the communities.

Izhar cardboard bike project from Giora Kariv on Vimeo.

I also run across Straw-bale construction, Hypertufa used for molding garden structures and such other dwelling needs.

Using perlite and empty plastic containers, one can design floating platforms that may be of much application and collateral benefits in case of flooding. PET bottles and even empty can stuffed within used plastic bag can be used to fill used tires and tire tubes and these can be embedded in platforms that will float in case of flooding.

Floating platforms on seas can be very helpful in creating areas to create algae culture for bio-diesel generation, solar energy harvesters and floating islands.

... to be continued

No comments:

Post a Comment

Tell your concerns and alternate vista.